![]() As you can see blow here is a folder and file which I have shared with the client and it is accessible using FTP, you may also access this from outside if you have allowed ftp travel on the firewall. Remember to restart FTP service from the Services panel, and then passive mode port range you set would take effect (or simply reboot the server if you dont know how to the open the panel). Browse the IP on internet explorer as shown below :ġ9. FTP does not use UDP if you refer to any computer networking books. In Azure portal, the external IP address can be copied from the virtual machine’s blade, or the public IP address’ blade. Now check the server IP address using command ipconfig:ġ8. To make passive mode work, the external IP address should be specified for the FTP server. Here we have allows all users to get the access to the FTP site:ġ7. We can add user and give them permission to access the FTP site.ġ6. Here you can change the FTP authorization rule if you want:ġ5. Now Select the Authentication and Authorization information or you can change it later also and finish the setup.ġ4. I have followed the Microsoft instructions on How to Configure Windows Firewall for a Passive Mode FTP Server, but this still resulted in failure. With the firewall up, the process goes through but the file fails to be saved on the Windows server. Here are you can select the option to use SSL or without SSL, I have selected no SSL:ġ3. If I turn off the firewall completely, the transfer is successful. It is working properly if the passive optical network (PON) light is. After adding FTP site it will prompt you to fill some details about the site:Įnter the site name and create a folder to store the data and put the location under the physical path:ġ2. ETH 1 / ETH 2 - Two ports can connect to the 10/100/1000 Ethernet ports on your. On the left side, you will find an option for “Site”, Right-click over site and click on Add FTP site:ġ1. Now we will configure the FTP site, click on the search box and open the IIS manager:ġ0. Now you can see the progress, FTP role and its service have been installed on this server, you may reboot this server.ĩ. Now following roles will be installed on this server, Click next to install:Ĩ. Now click next and move further to put a checkmark on FTP server, FTP Service and FTP Extensibility:ħ. Now click next and select the server as we have the host server selected here by default:ĥ. ![]() ![]() Click next to move further and Keep this installation type as selected below:Ĥ. Then the client starts the connection to the specified port. Now it will open the wizard to install the FTP Roles on this server:ģ. In passive mode, the server decides which server-side port the client should connect to.Login to the server and open the server manager, here click on Add Roles and Features:.The steps below assume you are using IIS 8.5 that comes by default with Windows 2012 R2. Here you have the steps I followed to set up my FTP server in Windows 2012 R2. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |